Care + Maintenance for the 1 Inch CollectionSeats in 100% reclaimed wood polypropylene:
Clean with soap and water and dry with a soft cloth.
Seats in plywood / Table tops in solid wood:
Clean with mild soap and water and dry thoroughly with a soft cloth. Do not use harsh or abrasive cleaners.
Take care not to expose the wood to extremes in temperature or humidity. Wet surfaces should be dried immediately. Wood changes color over time under normal conditions of light exposure, but do not expose directly to sunlight and heat.
For seats with upholstery, please refer to the fabric/material supplier's care advice.
Frame / Table top in hand brushed recycled aluminum:
All frames / table tops are made by hand from recycled aluminum, with a hand brushed, clear anodized finish. Each piece is unique with subtle differences.
Anodizing changes the aluminum surface to aluminum oxide, a super-strong material. Clean with soap and water, and dry with a soft cloth. You can also use Windex®, Formula 409® or similar spray cleaner, with or without bleach followed by a lint free towel. Wash any film or residue with hot water. Do not use Stainless Steel cleaner on any aluminum furniture. For Heavy-duty dirt or oil use a very hot water and strong soap, followed by LIGHT scrubbing in the direction of the aluminum grain with a soft bristled brush or damp Scotchbrite® pad.
Anodized aluminum is corrosion-proof and can be used outdoors, however we suggest cleaning with soap and water every two weeks to remove grit and other air pollutants that can pit the surface.